세부사항 |
Battery/Charger Simulator, 2 output Power, 15V 5A max, 50W
Output voltage: 0 to 15 V DC (see data sheet for current rating)
Specialized dual-channel power supply for design and testing of portable, battery-operated devices
Ultra-fast response to pulsed load operation
Speed-optimized command set reduces test times
Variable output resistance for simulating an actual battery's output response
Simulate a discharged battery and test charge control circuit performance with both a battery supply that can sink up to 3A and a charger supply
Pulse peak, average, and baseline current measurements
Integrating A/D converter for more precise measurements
100nA current measurement sensitivity
Analog output for complete load current waveform characterization
Catch production wiring problems immediately with open sense-lead detection
Built-in digital voltmeter
Four built-in digital control lines
The Model 2308 Portable Device Battery/Charger Simulator is optimized for us e in testing mobile phones and other portable, battery-operated devices. Whe n a device-under-test (DUT) transitions nearly instantaneously from a sleep or standby mode to the full power transmit state, the Model 2308's rapid re sponse to load changes means there's little transient voltage drop from the programmed output voltage and the output recovers quickly. This fast respon se is particularly critical when testing portable devices with a pulsed mode of operation because it allows the device to perform properly while it's bei ng tested. In contrast, the slow-responding source voltage typical of conven tional DC power supply products causes the DUT to perform improperly, leadin g to production yield problems and costly retesting.
|
.png)
